The water pressure in the use of handpiece should be flexibly adjusted according to the actual situation in use.

Release time:

2023-12-28 09:45

When we use handpiece, we can adjust them flexibly according to different situations. 1. If you feel that the handpiece is not strong enough, increase the working pressure slightly. On the other hand, if you feel that the power of the handpiece is too high and the speed is too high, lower the working air pressure a little.
2. If you feel that the water output is not enough, adjust the water volume switch and increase the water output. On the other hand, if you think the water output is too large, turn the water down.
3. If you feel that the atomization of the handpiece  is not good enough, adjust the atomization gas switch and adjust the atomization to the appropriate state.
4. For handpiece with multi-point water spray, water volume adjustment and atomization adjustment are not completely independent, and sometimes two switches are required to be adjusted at the same time to a suitable state.
5. After the dental chair is installed, the installation engineer will tell you that the dental chair is adjusted and does not move. If you keep obeying, it is wrong. The dental chair is also a device and a tool. We should learn to use and adjust it. adjust the equipment to the best working condition at any time.


 


Copyright © 2024 Foshan Qiyang Medical Equipment Co., Ltd. All Rights Reserved   SEO   Powered by: 300.cn
粤广审准许字[2026]第001522号
粤广审准许字[2025]第023056号
粤广审准许字[2025]第023283号
互联网药品信息服务备案凭证备案编号:粤网药信备字〔2026〕第00001号

Copyright©2023 Guangdong Shishi Medical Technology Co., Ltd.

Website construction:China Enterprise Power   Foshan

Business License