Qiyang Medical provides high-quality medical consumables for the dental industry
Solution to No Water in Single Point Water Spray handpiece
Release time:
2023-12-28 09:45

The single-point water spray handpiece suddenly has less water output or no water output, which can be checked and solved through the following steps:
1. Open the water switch of the handpiece, there is water out, and the water output can be adjusted, then the problem is solved.
2. Repeatedly turn on the large handpiece water volume switch, the handpiece water has been very small or no water, continue the following operation.
3. Take down the handpiece, step on the foot switch, and check whether there is water at the joint of the handpiece tube.
① If there is water out of the handpiece connector, check the water storage bottle, water storage bottle switch, water source changeover switch and handpiece water quantity switch in turn. Make sure that there is water in the water storage bottle, the water storage bottle switch is turned on, the water source switch is in the pure water position, and the handpiece water volume switch is turned on.
② After the operation above ①, the handpiece connector still has no water, which can be determined as the fault of the dental chair. Please contact the after-sales service department of the dental chair.
③ After the above ① operation, the handpiece connector has water out, continue the following operations.
4. Use the acupuncture needle randomly equipped in the handpiece box, or use 15# and 20# K to poke into the water spray hole of the handpiece (usually the second hole near the head) and poke a few times. After poking, connect the handpiece to the dental chair and try to see if there is no water and whether the water output can be adjusted up or down normally. If the water is discharged and the water volume can be adjusted normally, the problem will be solved. Many attempts failed to solve the problem. It was determined that the waterway was blocked and returned to the factory for maintenance.
Contact Information
Address: Room 502, Block 9, Liandong Youzhi Park, No. 10 Senshuji Road, Nansha Community, Danzao Town, Nanhai District, Foshan City
Contact Phone:0757-85411586/81263523
Mailbox:tenry@fsqiyang.com
Leave Us A Message.
Contact Us
Contact Phone:0757-29269893
Official website:www.shieldtex.cn
Contact Email:qiuwq@shieldtex.cn
Add: No.2, Shizhou Section, Baichen Road, Gangbei Industrial Zone, Shizhou Village, Chencun Town, Shunde District, Foshan City
OUR PRODUCTS
Focus on us
Copyright©2023 Guangdong Shishi Medical Technology Co., Ltd.